Servicing

• Bike is assessed for wear and damage.
• Gears adjusted to improve alignment.
• Chain oiled.
• Brakes adjusted to improve.
• Wheels trued to within 2mm.
• Tyres inflated to recommended pressure.

Excludes parts and additional labour

• Full gear adjustments inc: indexing and performance oil applied.
• Full brake adjustments inc: check and alignment of pads (reset for optimum performance).
• Full check of all bolts inc: torque set to axles, cranks and handlebar/stem, all to manufacturer specification.
• Bottom bracket adjusted to reduce/remove play.
• Headset adjusted to reduce/remove play.
• Wheels trued and tensioned in the bike to within 1mm.

Excludes parts and additional labour

• Hub bearings cleaned and rebuilt with new grease.
• Full wheel truing and tension service in a professional truing jig to within 0.5mm.

Excludes parts and additional labour

• Bottom bracket removed, cleaned and serviced.
• Headset bearings removed, cleaned and serviced.
• Torque check/tighten of all major bolts to manufacturer specification.
• All frame pivot bearings inspected and re-greased (full suspension models).

Excludes parts and additional labour

• Bottom bracket removed, cleaned and serviced.
• Headset bearings removed, cleaned and serviced.
• Torque check/tighten of all major bolts to manufacturer specification.
• All frame pivot bearings inspected and re-greased (full suspension models).

Excludes parts and additional labour

• Full strip down to a frame only.
• All bolts removed, cleaned and refitted with fresh grease.
• Full detailed clean down of the bike and polished to showroom standard.

• Full strip down to a frame only.
• All bolts removed, cleaned and refitted with fresh grease.
• Full detailed clean down of the bike and polished to showroom standard.
• Hardtail / Road bikes from £240 and full suspension/TT Bikes/E Bikes from £300.

• Full strip down to a frame only. 
• All openings prepped and readied for re fit after new paint.
• Fully Re built with a finishing service, ready to ride out of the door. 

Excludes parts and additional labour

Removal of chain from the bike, full ultrasonic clean of the chain followed by a Paraffin/PTFE hot bath to impregnate the chain with this long lasting compound (cleaning of other components also available) 

Removal of chain, cassette and derailleurs from the bike, full clean with our own in-house ultrasonic cleaning bath, re-oil and fitting. A split link may be needed after work completed to re-fit chain (supplied at £5). Wipe down of bike included

Removal of brakes from bike, full clean with our own in-house ultrasonic cleaning bath, re-oil and fitting.

A light clean to keep the dirt at bay. Included is a de-grease to the chain and drivetrain components, soap wash the bike and rinse down. Stubborn dirt will require our more in-depth showroom clean.

Our most involved clean. We aim to take any bike and fully clean to showroom standard removing any evidence of dirt from the bike. Included is a manual hand polish to the frame/fork.

Replacement of chain & cassette

Cranks and bottom bracket removed and full clean of frame and BB housing. Re-grease and install followed by a check of the gears

Removal of Stuck fast bottom bracket. Where possible, the old unit will be saved but cannot be guaranteed.

Full gear service including indexing, stop screw adjustment and re-oil using performance oil. 

Fitment of the drivetrain groupset including bottom bracket, chainset, cassette, chain, shifters and derailleurs (front/rear)

Fitment of the drivetrain groupset including bottom bracket, chainset, cassette, chain, shifters , bartape and derailleurs (front/rear)

New chain fitted to a BMX / single speed including tension and adjustment to brake

Update your Di2 including switching the Di2 gear levers, multi shift through the gears, change the speed at which Di2 can shift gear and troubleshooting

Re-cut of the pedal thread to clear out small damage/dirt build up

Ream out and installation of new pedal threads. Price per thread (9/16 only)

Installation and setup of power meter pedals or cranks.
Includes handover and tuition of operation (device not included)

Update of the latest software to the E Bike system.

Removal of old brakes (inc hydraulic) from bike, fitment of new units.
Brake bleed service available for £10 per brake caliper if required

Wheels and pads removed, brake pistons oiled, full bleed including fresh oil and pressure test. Brake re-setup with full clean down. Oil is included in the price

Wheel axle removed, all parts cleaned down and assessed for wear. Rebuilt with performance grease and tension adjusted in bearings (per wheel)

Old inner tube removed, tyre/wheel inspected for damage and penetrating items, new tube installed and inflated to recommended pressure (per wheel)

Wheel removed from bike, old inner tube removed, tyre/wheel inspected for damage and penetrating items, new tube installed and inflated to recommended pressure. Wheel reinstalled in bike, brake/gears checked for alignment (per wheel)

Rim surface cleaned and degreased. New tyre seated on rim with new glue (per wheel)

Full fitting of tubeless kit including preparation, installation and pressure tuning (per wheel)

Wheel trued to within 1mm, loose spokes tightened

Wheel trued to within 0.5mm, full wheel re-tension performed

New wheel built including full lacing, truing and tensioning to a complete, strong wheel

Wheel axle removed, all parts cleaned down and assessed for wear. Rebuilt with performance grease and tension adjusted in bearings (per wheel)

Full assembly of a bike from box to complete cycle. Included is a safety check and bike fitting with the client to gain a optimum position.

This service is designed to build a bike from its raw components. Included is the assembly and set up of your chosen components.  Please contact us for specific pricing

Fitting charge for misc. parts (discretion is advised)

Full strip down of a basic unit, clean of internals and rebuild with fresh grease/oil

Full strip down of high end suspension units, clean of internals and rebuild with fresh grease/oil. Please contact us for specific pricing

Full strip down of a basic unit, clean of internals and rebuild with fresh grease/oil

Full strip down of high end suspension units, clean of internals and rebuild with fresh grease/oil. Please contact us for specific pricing

Removal of old fork, clean down of headset and fitting of new unit to desired height. Set up included with our mechanic 

Removal of old unit and installation of new unit. Set up included with our mechanic

Fitting of new dropper seatpost including routing of cable/hose

Seatpost bled through with new oil (included) and air pressure set

Seatpost stripped down and internals cleaned, rebuilt with new grease/oils/seals as needed

Installation and set up of a cycle computer. Includes handover and tuition of operation (computer not included)

Installation and setup of electronic device such as Garmins, Wahoo’s  ect. Includes handover and tuition of operation (device not included)

Installation of a pannier frame to a cycle. Includes fitting of pannier bag if required

Installation of fixed mudguard set with stays to bicycle

Installation of fixed mudguard (single) with stays to bicycle

Installation and set up of a stabiliser set. Includes test ride and adjustment if required (price does not include stabilisers)

All components removed from old handlebar, new bar fitted and all items re-fitted and set to customer’s chosen position

All components removed from old handlebar, new bar fitted and all items re-fitted and set to customer’s chosen position (new tape not included)

New handlebar tape fitted including removal of old tape (cost of new tape not included)

Fork and old headset removed, frame and fork cleaned and bearings cleaned/re-greased. Bearing tension set. New fork can be cut down and a star nut fitted for an additional £10 when booked as part of service

Fork and bearings removed from bike. Cups and bearings cleaned and re-greased before installing. Bearing tension set.

The Bike fitting service is spent with the initial stages inside our workshop on our turbo trainer setting the saddle, handlebar and cleat position. The fit concludes with a short ride our on the local road. This is highly recommended as a first bike fit and most benefit for new road cyclists.

Frame bottom bracket threads cleaned out using our professional tapping set. Not designed for a first cut. Removal of bottom bracket service also available

Frame bottom bracket faced using our professional facing set. Removal of bottom bracket service also available

Frame headtube reamed using our professional reaming tool. 1-1/8 frames only. Removal of headset service also available

Frame headtube faced using our professional facing tool. 1-1/8 frames only. Removal of headset service also available

Frame or fork brake mount faced using our professional facing tool. Removal of brakes service also available

Re-cut of the thread to clear out small damage/dirt build up

Ream out and installation of new threads.
Various sizes including M5, M6 and M8

Removal and re-installation of bottle cage threads (frame space may limit work to be carried out)